You are here: Home > Do it yourself > CHAIN SAW MAINTENANCE > WEEKLY ROUTINES

   * Check that the AV elements are not soft or torn.
   * Lubricate the clutch drum bearing.
   * File off burrs, if any, on the sides of the bar.
   * Clean the spark plug and check the gap. The correct gap is 0.5 mm (0.020).
   * Check the starter and the recoil spring. Clean the fins on the flywheel.
   * Clean the cooling fins on the cylinder.
   * Clean or change the screen in the muffler.
   * Clean the carburetor body and air box.